Call 01707 643 953   

  • LOGIN
  • CHECKOUT
  • MY BASKET

    0 Products   £0.00 Sub-total


    BASKET | CHECKOUT NOW

    Traditional

    Note:

    If you return to us (undamaged), the light safe bag your paper is in,

    we will give you 10% off your next order of darkroom paper.

     

    Ilford's MGIV stock are almost depleted so paper cannot be back ordered. As we get the new 5th generation paper, it will be listed here

    Items 1 to 10 of 37 total

    per page
    Page:
    1. 1
    2. 2
    3. 3
    4. 4

    Grid  List 

    Set Ascending Direction
    1. WA50

      Fotospeed WA50 Wash Aid 1 litre

      £5.38

      Fotospeed RA50 is a highly concentrated liquid designed to greatly reduce surface tension to allow the easy dispersion of water from the surface of photographic materials without damaging the emulsion. Used in the final rinse, it noticeably promotes streak free drying of film and shortens drying times.

      - Dilute to: 1+200

      Learn More
    2. Fotospeed ST20 Sepia Toner 150ml KIT (makes 1.5 litres)

      Fotospeed ST20 Sepia Toner 150ml KIT (makes 1.5 litres)

      £10.00

      Fotospeed ST20 Odourless Vario Sepia Toner can produce a wide range of sepia tones on Fibre and Resin Coated B&W papers. It comprises three parts: Part 1 - Bleach; Part 2 - Toner; Part 3 - Toner Additive. Parts 1 and 2 mix separately to make two working solutions, with Part 3 being added in its concentrated form to Part 2 working solution to adjust the shade of sepia required. Part 3 is needed to activate the toner.

      MIXING INSTRUCTIONS Part 1: Bleach - Dilute 1+9 with water to make the volume of working strength solution required. Should you wish the bleaching time to be faster or slower make up the solution stronger for faster bleaching and more dilute for slower bleaching. Part 2: Toner - Dilute 1+9 with water to make the volume of working strength solution required. Part 3: Toner Additive - This should be added, without dilution, directly to part 2 working solution in the quantity required to produce the shade of sepia required. The additive can also be used to replenish the toning solution to hold the desired hue of sepia.

      USAGE Having selected your print to be toned ensure that it has been fully fixed and washed. In the case of dry prints first soak them in water to ensure that the emulsion is fully wet. This takes about one minute. 1. Place the print in the bleach bath and agitate gently. Bleaching times may vary according to paper type. Complete bleaching of a print, to the point where there is no black image apparent, can take up to 2 minutes. Prints may be removed from the bleach at any time without waiting for full bleaching to take place. The toner will only tone silver that has been bleached, any remaining silver from partial bleaching will stay as silver black and can add character to the final sepia toned print. After bleaching rinse the print well in running water for 2 minutesfor RC and 5 minutes for FB to remove all traces of the bleach. 2. Place the bleached print into the tray of Sepia Toner with the required amount of additive and agitate well for about one minute to fully tone the print. 3. Remove the print and wash for 3 mins for RC and 15 mins for FB and dry in the normal manner. Both the Bleach and Sepia Toner working solutions can be kept for reuse in airtight containers.

      CAPACITY Each litre of working solution should process 30 - 8x10in prints, depending on paper and image.

      PRINT QUALITY If there is doubt that the print to be toned has been fixed and washed thoroughly, it should be refixed and washed fully before toning. Staining on the toned print can result from the print having been inadequately fixed and washed beforehand. Variable Contrast papers may require the bleaching time to be extended over those published. Alternatively, the bleach can be diluted 1+7 (or stronger) with water to reduce the time required in this solution for variable contrast papers. A properly sepia toned print will be archivally permanent. The whole procedure should be done under normal room or daylight conditions.


      Data Sheet Part 1

      Data Sheet Part 2

      Data Sheet Part 3

      Learn More
    3. st20 part 3

      Fotospeed ST20 Part 3 Sepia Toner Additive only 500ml

      £5.50

      Fotospeed ST20 Odourless Vario Sepia Toner can produce a wide range of sepia tones on Fibre and Resin Coated B&W papers. It comprises three parts: this is Part 3 only.

      Data Sheet

      Learn More
    4. Fotospeed ST10 Traditional Sepia Toner 100ml to make 1L

      Fotospeed ST10 Traditional Sepia Toner 100ml to make 1L

      £6.27

      Fotospeed ST10 NON Vario Sepia Toner is an odourless toner which will produce a fixed sepia tone on both Fibre and Resin Coated B&W papers.

      It comprises two parts: Part 1 - Bleach & Part 2 - Toner. Each part mixes separately to make two working solutions. This toner will give a traditional sepia colour with no control over the colour.

      MIXING INSTRUCTIONS Part 1: Bleach - Dilute 1+9 with water to make the volume of working solution required. Part 2: Toner - Dilute 1+9 with water to make the volume of working solution required.

      USAGE Having selected the print to be toned ensure that it has been fully fixed and washed. In the case of dry prints, first soak them in water for 1 minute to ensure even take up of bleach. 1. Place the print in the bleach bath and agitate gently. Bleaching times may vary according to paper type. 2. After bleaching, place the print into running water for 1 minute for RC paper and 5 minutes for fibre paper. 3. Place the print into the toner bath, agitate gently and observe the image reconstructing. Full toning will be completed in 1 minute with fresh solution. 4. Finally wash the print in running water. Wash RC papers for 2 minutes and fibre papers for 10 minutes.

      CAPACITY Both the Bleach and Toner working solutions can be kept for reuse in airtight containers. Both solutions will however deteriorate once used and a slow-down in activity should be anticipated together with a colour shift in the toner on subsequent prints. To maintain consistency of sepia tone, it is advisable to make up only small quantities (approx. 200mls) of working solution at a time. After putting 5-8x10 prints through 200mls of solution, it will become exhausted. Each litre should process 25-8x10 prints assuming average density.

      PRINT QUALITY If there is any doubt that the print to be toned has been fully fixed and washed, it should be refixed and rewashed thoroughly before beginning toning. Staining on a toned print can result from the print having been inadequately fixed and washed beforehand. Variable contrast papers may be slow to react with the bleach. If this occurs extend the bleaching time or make the bleach more concentrated. The whole procedure should be done under normal room or daylight conditions.

      Learn More
    5. SB50

      Fotospeed SB50 Odourless Indicator Stop 1L

      £7.69

      - Makes for a more pleasant darkroom environment due to its odourless formula
      - An odourless citric acid stop bath with indicator dye to warn of exhaustion.
      - SB50 dilutes 1+19 with water.
      - Stop Bath arrests development immediately on contact to ensure clear highlights in paper and low fog on film.
      - Protected fixer life and performance. No alkali carry-over from the developer.

      Learn More
    6. Fotospeed RC VC Oyster 8x10 25 Sheets

      Fotospeed RC VC Oyster 8x10 25 Sheets

      £17.44

      - RCVC Heavyweight resin coated variable contrast B+W paper.
      - Smooth Oyster finish.
      - The chloro-bromide emulsion has greater D-max and is capable of recording grade 0-5 using appropriate filters or yellow and magenta channels on a colour head enlarger.
      - Suitable for dish and machine processing.
      - Excellent for toning and tinting techniques.

      Learn More
    7. Fotospeed RC VC Oyster 8x10 100 Sheets

      Fotospeed RC VC Oyster 8x10 100 Sheets

      £46.08

      - RCVC Heavyweight resin coated variable contrast B+W paper.
      - Smooth Oyster finish.
      - The chloro-bromide emulsion has greater D-max and is capable of recording grade 0-5 using appropriate filters or yellow and magenta channels on a colour head enlarger.
      - Suitable for dish and machine processing.
      - Excellent for toning and tinting techniques.

      Learn More
    8. Fotospeed RC VC Oyster 5x7 25 Sheets

      Fotospeed RC VC Oyster 5x7 25 Sheets

      £9.99

      - RCVC Heavyweight resin coated variable contrast B+W paper.
      - Smooth Oyster finish.
      - The chloro-bromide emulsion has greater D-max and is capable of recording grade 0-5 using appropriate filters or yellow and magenta channels on a colour head enlarger.
      - Suitable for dish and machine processing.
      - Excellent for toning and tinting techniques.

      Learn More
    9. Fotospeed RC VC Oyster 5x7 100 Sheets

      Fotospeed RC VC Oyster 5x7 100 Sheets

      £21.94

      - RCVC Heavyweight resin coated variable contrast B+W paper.
      - Smooth Oyster finish.
      - The chloro-bromide emulsion has greater D-max and is capable of recording grade 0-5 using appropriate filters or yellow and magenta channels on a colour head enlarger.
      - Suitable for dish and machine processing.
      - Excellent for toning and tinting techniques.

      Learn More
    10. Fotospeed RC VC Oyster 12x16 10 Sheets

      Fotospeed RC VC Oyster 12x16 10 Sheets

      £17.23

      - RCVC Heavyweight resin coated variable contrast B+W paper.
      - Smooth Oyster finish.
      - The chloro-bromide emulsion has greater D-max and is capable of recording grade 0-5 using appropriate filters or yellow and magenta channels on a colour head enlarger.
      - Suitable for dish and machine processing.
      - Excellent for toning and tinting techniques.

      Learn More

    Items 1 to 10 of 37 total

    per page
    Page:
    1. 1
    2. 2
    3. 3
    4. 4

    Grid  List 

    Set Ascending Direction

    Please wait...

    You've just added this product to the cart:

    Continue shopping View cart & checkout
    You've just deleted this product from the cart:

    Continue shopping View cart & checkout