Call 01707 643 953   

  • LOGIN
  • CHECKOUT
  • MY BASKET

    0 Products   £0.00 Sub-total


    BASKET | CHECKOUT NOW

    Traditional

    Note:

    If you return to us (undamaged), the light safe bag your paper is in,

    we will give you 10% off your next order of darkroom paper.

     

    Ilford's MGIV stock are almost depleted so paper cannot be back ordered. As we get the new 5th generation paper, it will be listed here

    6 Item(s)

    per page

    Grid  List 

    Set Ascending Direction
    1. Fotospeed ST20 Sepia Toner 150ml KIT (makes 1.5 litres)

      Fotospeed ST20 Sepia Toner 150ml KIT (makes 1.5 litres)

      £10.00

      Fotospeed ST20 Odourless Vario Sepia Toner can produce a wide range of sepia tones on Fibre and Resin Coated B&W papers. It comprises three parts: Part 1 - Bleach; Part 2 - Toner; Part 3 - Toner Additive. Parts 1 and 2 mix separately to make two working solutions, with Part 3 being added in its concentrated form to Part 2 working solution to adjust the shade of sepia required. Part 3 is needed to activate the toner.

      MIXING INSTRUCTIONS Part 1: Bleach - Dilute 1+9 with water to make the volume of working strength solution required. Should you wish the bleaching time to be faster or slower make up the solution stronger for faster bleaching and more dilute for slower bleaching. Part 2: Toner - Dilute 1+9 with water to make the volume of working strength solution required. Part 3: Toner Additive - This should be added, without dilution, directly to part 2 working solution in the quantity required to produce the shade of sepia required. The additive can also be used to replenish the toning solution to hold the desired hue of sepia.

      USAGE Having selected your print to be toned ensure that it has been fully fixed and washed. In the case of dry prints first soak them in water to ensure that the emulsion is fully wet. This takes about one minute. 1. Place the print in the bleach bath and agitate gently. Bleaching times may vary according to paper type. Complete bleaching of a print, to the point where there is no black image apparent, can take up to 2 minutes. Prints may be removed from the bleach at any time without waiting for full bleaching to take place. The toner will only tone silver that has been bleached, any remaining silver from partial bleaching will stay as silver black and can add character to the final sepia toned print. After bleaching rinse the print well in running water for 2 minutesfor RC and 5 minutes for FB to remove all traces of the bleach. 2. Place the bleached print into the tray of Sepia Toner with the required amount of additive and agitate well for about one minute to fully tone the print. 3. Remove the print and wash for 3 mins for RC and 15 mins for FB and dry in the normal manner. Both the Bleach and Sepia Toner working solutions can be kept for reuse in airtight containers.

      CAPACITY Each litre of working solution should process 30 - 8x10in prints, depending on paper and image.

      PRINT QUALITY If there is doubt that the print to be toned has been fixed and washed thoroughly, it should be refixed and washed fully before toning. Staining on the toned print can result from the print having been inadequately fixed and washed beforehand. Variable Contrast papers may require the bleaching time to be extended over those published. Alternatively, the bleach can be diluted 1+7 (or stronger) with water to reduce the time required in this solution for variable contrast papers. A properly sepia toned print will be archivally permanent. The whole procedure should be done under normal room or daylight conditions.


      Data Sheet Part 1

      Data Sheet Part 2

      Data Sheet Part 3

      Learn More
    2. Fotospeed RC VC Oyster 8x10 25 Sheets

      Fotospeed RC VC Oyster 8x10 25 Sheets

      £17.44

      - RCVC Heavyweight resin coated variable contrast B+W paper.
      - Smooth Oyster finish.
      - The chloro-bromide emulsion has greater D-max and is capable of recording grade 0-5 using appropriate filters or yellow and magenta channels on a colour head enlarger.
      - Suitable for dish and machine processing.
      - Excellent for toning and tinting techniques.

      Learn More
    3. Fotospeed RC VC Oyster 12x16 10 Sheets

      Fotospeed RC VC Oyster 12x16 10 Sheets

      £17.23

      - RCVC Heavyweight resin coated variable contrast B+W paper.
      - Smooth Oyster finish.
      - The chloro-bromide emulsion has greater D-max and is capable of recording grade 0-5 using appropriate filters or yellow and magenta channels on a colour head enlarger.
      - Suitable for dish and machine processing.
      - Excellent for toning and tinting techniques.

      Learn More
    4. Fotospeed RC VC Gloss 8x10 25 Sheets

      Fotospeed RC VC Gloss 8x10 25 Sheets

      £17.78

      - RCVC Heavyweight resin coated variable contrast B+W paper.
      - High Gloss finish.
      - The chloro-bromide emulsion has greater D-max and is capable of recording grade 0-5 using appropriate filters or yellow and magenta channels on a colour head enlarger.
      - Suitable for dish and machine processing.
      - Excellent for toning and tinting techniques.

      Learn More
    5. Fotospeed RC VC Gloss 12x16 10 Sheets

      Fotospeed RC VC Gloss 12x16 10 Sheets

      £17.23

      - RCVC Heavyweight resin coated variable contrast B+W paper.
      - High Gloss finish.
      - The chloro-bromide emulsion has greater D-max and is capable of recording grade 0-5 using appropriate filters or yellow and magenta channels on a colour head enlarger.
      - Suitable for dish and machine processing.
      - Excellent for toning and tinting techniques.

      Learn More
    6. Fotospeed Digital Contact Film  160u A4 10 Sheets

      Fotospeed Digital Contact Film 160u A4 10 Sheets

      £13.21

      Specifically developed for making contact negatives through an ink jet printer, for any darkroom process from traditional alternative processes to contact printing onto fibre based silver gelatin papers. This film is instant dry, microporous and water resistant, and produces the highest quality continuous tone film. It facilitates the use of digital technology to dodge and burn pixel by pixel to produce the perfect negative.

      Learn More

    6 Item(s)

    per page

    Grid  List 

    Set Ascending Direction

    Please wait...

    You've just added this product to the cart:

    Continue shopping View cart & checkout
    You've just deleted this product from the cart:

    Continue shopping View cart & checkout